C!T ROM 3/ct-rom iiib.zip/ct-rom iiib/WINDOWS/UTILITY/DESKTOP/WINCAP/PCS.TXT

Text File | 1994-10-10 | 31KB | 785 lines

                        Professional Capture Systems

                             * WinCapture *
                             * DosCapture *


                              User's Guide




                           Acknowledgements

GIF is a service mark property of CompuServe Incorporated.
Graphic Interchange Format is the copyright property of CompuServe
Incorporated. For further information, please contact:
    CompuServe Incorporated
    Graphics Technology Department
    500 Arlington Center Boulevard
    Columbus, OH  43220   USA

IBM, IBM-PC IBM-AT and PC-DOS are trademarks of the International Business
Machines Corporation.

MS-DOS, Program Manager, and Microsoft Windows are trademarks of Microsoft
Corporation.

Paint Shop Pro is a trademark of JASC, Inc.




                LIMITED WARRANTY AND DISCLAIMER OF WARRANTY

    THIS SOFTWARE AND ACCOMPANYING WRITTEN MATERIALS (INCLUDING INSTRUCTIONS
FOR USE) ARE PROVIDES "AS IS" WITHOUT WARRANTY OF ANY KIND. FURTHER, JASC,
INC.(JASC) DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING
THE USE, OR THE RESULTS OF USE, OF THE SOFTWARE OR WRITTEN MATERIALS IN TERMS
OF CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS, OR OTHERWISE. THE ENTIRE
RISK AS TO THE RESULTS AND PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU. IF
THE SOFTWARE OR WRITTEN MATERIALS ARE DEFECTIVE YOU, AND NOT JASC OR ITS
DEALERS, DISTRIBUTORS, AGENTS, OR EMPLOYEES, ASSUME THE ENTIRE COST OF ALL
NECESSARY SERVICING, REPAIR, OR CORRECTION.

    THE ABOVE IS THE ONLY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, THAT IS MADE BY JASC, ON THIS JASC PRODUCT.
NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY JASC, ITS DEALERS,
DISTRIBUTORS, AGENTS OR EMPLOYEES SHALL CREATE A WARRANTY OR IN ANY WAY
INCREASE THE SCOPE OF THIS WARRANTY AND YOU MAY NOT RELY ON ANY SUCH
INFORMATION OR ADVICE. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO
STATE.

    NEITHER JASC NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE CREATION,
PRODUCTION OR DELIVERY OF THIS PRODUCT SHALL BE LIABLE FOR ANY DIRECT,
INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND
THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT EVEN IF
JASC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

    This Limited Warranty shall be governed and construed in accordance with
the laws of the State of Minnesota.



                           ACKNOWLEDGEMENT

BY USING THE SHAREWARE VERSION OF PROFESSIONAL CAPTURE SYSTEMS YOU ACKNOWLEDGE
THAT YOU HAVE READ THIS LIMITED WARRANTY, UNDERSTAND IT, AND AGREE TO BE BOUND
BY ITS' TERMS AND CONDITIONS. YOU ALSO AGREE THAT THE LIMITED WARRANTY IS THE
COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN THE PARTIES AND
SUPERSEDE ALL PROPOSALS OR PRIOR AGREEMENTS, ORAL OR WRITTEN, AND ANY OTHER
COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER OF THE THE
LIMITED WARRANTY.





                       PROFESSIONAL CAPTURE SYSTEMS

Welcome to the Professional Capture Systems (PCS). The PCS is made up of
two separate programs; one for the DOS environment and one for the Windows
environment.

The programs that make up PCS are called DosCapture and WinCapture. The
following is the guide to using both of these applications.

Required Equipment for DosCapture
DosCapture requires a 80286 or higher computer system with a VGA video
system.

Required Equipment for WinCapture
WinCapture is a Windows 3.0 or higher program. The required equipment is
the same as what is necessary to run Windows 3.0 or higher.



                               DosCapture


DosCapture is a program that will "capture" (or "take a picture of" if you
will) DOS screens.  This capture will be saved as a PCX graphics file.

Since the PCX is a standard graphics file format, the DOS screen can now be
used with most desktop publishing applications, word processors or other
applications that will work with graphics. If your application does not
support the PCX format, the image can easily be converted to another format
using a conversion program such as Paint Shop Pro. (blatant plug)

DosCapture is designed to capture screens when using a VGA card and while
running in a standard VGA 16 or 256 color mode. These VGA modes include:
   Text modes: (Characters per line x Number of lines x Colors)
        40 x 25 x 16
        80 x 25 x 16
      (??? x ?? x 16) - Extended VGA text modes, dependent on your video
                        card.

   Graphics modes: (Width x Height x Colors)
       320 x 200 x 16
       640 x 200 x 16
       640 x 350 x 16
       640 x 480 x 16
       320 x 200 x 256

You will notice that none of the "Super" VGA graphics modes are listed.
These modes are not standard from one VGA card to the next. To support them
would require that DosCapture become a much larger program, and therefore
take up more memory.

The extended text modes of "Super" VGA graphics are supported for the major
VGA chips. To support the various modes DosCapture reads a "MODE" file
called DOSCAP.MOD. We have provided various MODE files for the different
VGA chips.


               Configuring DosCapture For Your Video Board

   *********************************************************************
   *                                                                   *
   *     DosCapture ships with the DOSCAP.MOD file being identical to  *
   *   GENERIC.MOD. This means that none of your extended text modes   *
   *   are supported until you change DOSCAP.MOD.                      *
   *     If you do not need the extended text modes you can use        *
   *   DosCapture just the way it is. Thus, you can skip over this     *
   *   section.                                                        *
   *                                                                   *
   *********************************************************************

Before you can configure DosCapture, you will need to know the type of
video chip that is on your video board.  It is important that you don't
confuse this with the name brand of the video board.

There are numerous name brands for video boards (mine happens to be a XYZ
Super Ultra VGA), but the video chips that are used on these boards are
limited to just a handful of manufacturers. In order to find out the type
of chip on my video board, I first called XYZ. Guess what? XYZ is out of
business. No problem, I just opened the machine and looked at the big square
chip on the board. It said ATI. Thus XYZ was buying video chips from ATI to
build the XYZ Super Ultra VGA.

If you do not know what type of chip is on your video board, you will need
to consult your video board user's guide, or other documentation that came
with your computer.  If you cannot find this information, please contact
your hardware dealer.

By displaying the contents of your directory (type DIR at C:\DOSCAP>), you
will notice that there are a number of "mod" files. These "mod" files are
your mode files. They are used by DosCapture to specify the type of video
chip that is on your video board.

When DosCapture is first started it will read the DOSCAP.MOD file and
support the modes that are described in this file. DosCapture ships with
the DOSCAP.MOD file being identical to GENERIC.MOD. This means that none
of your extended text modes are supported until you change DOSCAP.MOD. To
make this change, simply copy the "MODE" file for your VGA chip to
DOSCAP.MOD.  This is done as follows:

(In the example below, we will be using the file for an ATI chip. You can
substitute "ATI" with the name of the chip that your video board uses.)

At the hard drive prompt, get into the Doscap directory (CD\DOSCAP "enter")
and type in the following:
COPY ATI.MOD DOSCAP.MOD

DosCapture is now ready to run.


                    Starting and finishing DosCapture

To use DosCapture, get into the Doscap directory and type:
DOSCAP

DosCapture will now be installed and resident in your computer
memory until it is unloaded or the machine is shutdown.

Note:  If you are running in a DOS window, under Windows, DosCapture will
be removed from memory when you shut down the DOS window. When you are done
with DosCapture, simply type the following at the prompt:
DOSCAP UNLOAD

(Note that DOSCAP must be in your path or you must be in the DosCapture
directory to type this command.) This will remove DosCapture from memory
(This does not delete the files from the hard drive.  DosCapture and the
screen captures already done will remain in the DOSCAP directory).


                             Screen Capturing

While DosCapture is resident in memory (see Starting DosCapture above),
start up the DOS program you want to do a screen capture of.  When the
desired screen is displayed, press the "ALT" and the "." keys at the same
time. You will hear one low toned beep followed by a series of clicks that
let you know a capture is in progress. When DosCapture is finished with the
capture, you will hear one high toned beep. If DosCapture does not support
the video mode that your video system is in when the "Alt" and "." keys
where pressed, then you will hear a high tone immediately followed by a low
tone.

Your capture will be saved as a PCX file and saved to the directory that
was current when you started DosCapture.  Files are named CAPxxxx.PCX
(x's representing digits) and will start from CAP0001.PCX and ascend by
one digit for each capture. When DosCapture is reloaded after being shut
down, it will scan the PCX files in the directory and begin the count at
one higher than the highest xxxx value.


                         Other DosCapture Commands

DosCapture recognizes the following commands:
  Help
  Status
  Reset

Commands are given by typing:
  DOSCAP[space][command]

Help   -- will give you general information about Dos-Capture.
Status -- will give you information about the last capture you made. The
          information will probably be pretty useless to you, but very
          important to us if you need technical help.
Reset  -- will reset the filename that the next capture will be saved to.
          It will rescan the directory that the captures are saved to and
          determine what the next filename is that should be used. This is
          handy if you want to delete some of your prior captures while
          DosCapture is still resident in memory (the same thing happens
          when you unload and reload DosCapture, reset just eliminates the
          extra steps).



                            About the MOD files:

DosCapture is configured for your video board by reading the file
DOSCAP.MOD.  When you setup DosCapture, you should have copied the MOD
file for your video board to DOSCAP.MOD.  The following is an explanation
of how a MOD file is laid out. For the purposes of this example, we will
be using the file GENERIC.MOD.

All of the mode numbers listed in this example are standard for all VGA
boards.  Super VGA modes however are non-standard, so that a #33 for one
board may be completely different from a #33 of different board.  That is
why the MOD file of the board you are using must be copied into DOSCAP.MOD.

In a text mode, the BPP field is used to control DosCapture. It should
normally be set to 0 (zero) or left blank, but can be set to other values
to change the look of the text as it is saved out as a PCX file.  Anytime
you enter a value in the BPP field you will need to enter values for the
HRES and VRES fields.

When making changes to these files there are some do's and don'ts...
Do not remove or add the semicolons at the beginning of each line.  The
absence of a semicolon indicates that DosCapture needs this information
and can find it here.  A semicolon says that the line is descriptive and
should be ignored by DosCapture. When entering values in the fields other
than BPP, they must always be followed by a comma to separate them from
the next field.

On the following page is the file GENERIC.MOD. It not only shows the layout
of the file, but also describes the various components of the file.


;The following line is the text description of video board
GENERIC VGA CARD
;
; The following table is information that is used by DosCapture.
;
; This is a description of how the table is organized.
;
; The FIRST column is MODE#. This is the video mode that the card is running
; in. Note that the MODE# is in hexadecimal.
;
; The SECOND column is TYPE. The type must be either 0 or 1. 0 means that the
; mode is a text mode. 1 means that the mode is a graphics mode.

; The THIRD column is HRES. In text mode this is the character width in pixels.
; IT MUST BE EITHER 8 or 9. If you set it to anything else, DosCapture will
; use 8. This field does not have to be filled in text mode unless you set
; the BPP field.
; In graphics mode this is the width of the screen in pixels.
;
; The FOURTH column is VRES. In text mode this is the character height in
; pixels. This field does not have to be filled in text mode unless you set
; the BPP field.
; In graphics mode this is the height of the screen in pixels.
;
; The FIFTH column is BPP. In graphics mode this is the number of bits per
; pixel of the mode. It must be either 4 or 8. A 4 means 16 colors. An 8 means
; 256 colors.
; In text mode this field is used to control DosCapture. It should normally be
; set to 0 (or left blank), but can be set to other values according to the
; following list:
;   a 0 means operate normally, getting all information from your video card.
;   a 1 means override the video card's character size information and take
;       the information from this mode file.
;
;
;MODE#    TYPE    HRES    VRES   BPP
0,    0
1,    0
2,    0
3,    0
D,    1,    320,    200,    4
E,    1,    640,    200,    4
10,    1,    640,    350,    4
12,    1,    640,    480,    4
13,    1,    320,    200,    8


                           About the Captured Screens:

Characters displayed in text modes are normally made up of 8 or 9 pixels in
width. The height of the characters vary widely. We will just talk about
the width. The same logic follows for the height (only in the other
direction).

When DosCapture captures a text screen it queries the video board for the
character characteristics. It also gets the currently used font from the
video board. These characters are turned into graphics and saved as a
graphics file.

If your video board is running in a mode that allows 80 characters across
the screen, and the character width is 8 then the resulting graphic would
have an 80 times 8, or 640 pixels wide. Thus you could then use an image
viewer to view the resultant graphic and the graphic would fit onto the
screen in a graphics mode. If instead of a character width of 8, we had a
character width of 9, the resulting graphic would be 80 times 9, or 720
pixels wide. Thus, viewing it with an image viewer, we would not be able
to see the entire width of the image at one time.

This situation is more pronounced when you start getting into the extended
text modes of 132 characters across. Although you can display 132 characters
across in text mode, it would take a graphics mode that had a width of 1056
to display the entire graphic on the screen. (This is assuming the
characters had a width of 8 pixels.)




                                WinCapture


WinCapture is designed to take care of your screen capturing needs while
running under Windows.  It is an invaluable tool for quick capturing your
choice of area, full screen, client area or window.


                             Starting WinCapture

To start WinCapture, simply click on the WinCapture icon.  At first you may
think that WinCapture has not been started, since no window will open.
WinCapture will always reside as an icon at the bottom of your screen.


                               Using WinCapture

Once you have WinCapture configured the way you want, it is unnecessary to
open the menu to make your captures.  Simply start WinCapture, press your
designated hot key to make your captures, and that's it!  WinCapture will
remain running until "Close" is selected from the WinCapture Menu or until
Windows is exited.


                             WinCapture Menu Items

To activate the WinCapture menu, click once on the icon. In addition to the
standard system menu items you will find the following menu items:

  Capture Setup
  Printer Setup
  View Last Capture
  Help
  About

  Each of the menu items and their associated dialog boxes are described on
the following pages.


                               Capture Setup

Use this selection to configure the way WinCapture is to work.

1.  From the WinCapture Menu select "Capture Setup". This will activate the
    "WinCapture Setup" dialog box.

2.  In the "Capture" area choose the type of capture you will be doing
    (area, full screen, client area or window).

3.  In the "Hot Key" area choose the key that is to activate WinCapture.
    You must pick one of the function keys. In addition, you can designate
    the "Ctrl", "Alt", or "Shift" (or any combination of these) as keys that
    must be pressed with the function key to activate WinCapture.

4.  In the "Image Processing" area select any image processing that should
    be done to each image captured. The available options are;
    Greyscale and Invert Colors.

5.  In the "Send To" area select where WinCapture should send your images.
    The available options are; Clipboard, Printer and Disk.

6.  If you have selected "Disk" from the "Send To" area of the dialog box in
    step 5, the "File Format and Directory Setup" button will activate the
    File Format and Directory Setup dialog box.  Choose the directory where
    the image is to be sent and the image file format it is to be saved as.

    Note: If "Disk" is not selected from the "Send To" area in step 5, this
          button will not be available for use.


                      The WinCapture Setup Dialog Box

The "Capture" area
  The Capture area will allow you to select the type of capture that is to
  take place. To select one of the options, click on the desired option
  button.  The allowable options are:
  Area -- This option will allow you to define the area that is
          to be captured.
  Full Screen -- This option will capture the full screen.
  Client Area -- This option will capture the client area of the
                 active window.
  Window -- This option will capture the active window.

  Include Cursor -- This option will be available only when the capture
                    area is Full Screen, Client Area or Window. When
                    selected this option will include the cursor in the
                    captured image if the cursor was within the captured
                    area.

The "Hot Key" area
  The Hot Key area will allow you to select the hot key combination that
  will be used to activate the capture. You must pick one of the functions
  keys by clicking on its option button. In addition, you can select "Alt",
  "Ctrl" and/or "Shift" to be used in conjunction with the function keys by
  clicking on the appropriate check box.

The "Image Processing" area
  The image processing section will allow you to select any image processing
  that should happen to each capture. To select one or more of the image
  processing, you can click on the associated check box. Your available
  options are:
  Greyscale -- This option will convert your colored image to a greyscaled
               image.
  Invert Colors -- This option will create a negative image of your capture
                   (change each color to its compliment).

The "Send to" area
  The Send to section allows you to designate the various places that the
  capture should be sent to. To select one or more of the options, click on
  the associated check box. The different places that the capture can be
  sent to include; clipboard, printer and the disk.
  Clipboard -- This option will save the captured image to the clipboard.
               Note:  Since only one image at a time is stored in the
               clipboard, only the last capture will be available.
  Printer -- This option will send the captured image to the printer.
  Disk -- This option will save the captured image to the directory and
          format that you have specified.  Use the "File Format and
          Directory Setup" Command Button to select the directory and
          format to be used.

The "File Format and Directory Setup" Command Button
  This will activate the File Format and Directory Setup Dialog Box. This
  will allow you to select the directory and format to use when saving a
  captured image.

The "Cancel" Command Button
  If you change your mind and want to back out without saving the changes
  you have made click the "Cancel" command button.

The "OK" Command Button
  Click the "OK" command button (or press "Enter") to save the changes that
  you have made.


                The File Format and Directory Setup Dialog Box

The "Directory:" Display
  This displays the current directory that the image will be saved to.  If
  you change the drive and/or the directory (by using the "Directories"
  list box), the "Directory:" display changes accordingly.

The "Directories" List Box
  The "Directories" list box displays the drives and directories available
  for saving images.  If you want to save to a different drive or directory,
  double click on the drive, or directory, of your choice.

The "Format" List Box
  The "Format" list box lists the formats that are capable of holding your
  captured images.  For example, if you are using a video driver that is
  running at 16 million colors, then the GIF format would not be displayed
  since it can not hold this type of image. To change between the available
  formats, click the mouse pointer on the type of format you want to use.

The "Cancel" Command Button
  If you change your mind and want to back out without saving the directory
  or format changes, click the "Cancel" command button.  You will be
  returned to the WinCapture Setup dialog box.

The "OK" Command Button
  Click the "OK" command button (or press "Enter") to save the directory
  and the file format of saved images.


                            Printer Setup

Use this selection to change the active printer, and/or to set up the way
the active printer is configured.

To change the active printer...
1.  From the WinCapture Menu select "Printer Setup".  This will activate
    the Printer Setup dialog box.  It will display the printers that are
    installed for Windows.

2.  Highlight the printer that you want active.

3.  Click the "OK" button (or press "Enter").

To change the configuration of a printer...
1.  From the WinCapture Menu select "Printer Setup".  This will activate
    the Printer Setup dialog box.  It will display the printers that are
    installed for Windows.

2.  From the "Printer Setup" dialog box, click the "Setup" command button
    to display a configuration box applicable to your selected printer.
    This configuration box will be arranged differently depending upon
    which printer type you have selected.  Refer to your printer's manual
    for information about the various configuration selections.

3.  You can change the configuration of the printer as you desire.  When
    finished, return to the "Printer Setup" dialog box and click the "OK"
    button  (or press "Enter").

If the printer that you have selected is using a Windows 3.x printer
driver, the changes you make to your printer's setup will only be effective
for WinCapture.



                      The "Printer Setup" Dialog Box

The "Printer:" List Box
  The printers already installed to Windows will be listed here.  If
  multiple printers are installed, you can select which printer will be
  active for this WinCapture session.

The "Setup" Command Button
  Click the "Setup" command button to produce additional dialog boxes
  containing various options for the selected type of printer. You can
  change the configuration of a printer's operation for this WinCapture
  session.

The "Cancel" Command Button
  If you change your mind and want to back out without changing the
  current printer selection, click the "Cancel" command button.

The "OK" Command Button
  Click the "OK" command button  (or press "Enter") to activate selections
  you have made for this WinCapture session.



                           View Last Capture

Use this selection to display the last image that was captured.

1.  From the WinCapture Menu select "View Last Capture". The last capture
    that was made will be displayed.

2.  Press any key to return to Windows.



                                Help

Use this selection to activate the WinCapture on-line help system.


1.  From the WinCapture menu select "Help".  This opens the "WinCapture
    Help" window containing an index of topics you can select for viewing.

2.  Close the help window when you are through. You will be returned to the
    WinCapture icon.



                               About

Use this selection to display general information about WinCapture and your
video system.

1.  From the WinCapture menu select "About".  This opens the "About
    WinCapture" dialog box.  This describes the copyright and the version
    of WinCapture you are using.  The box also provides information about
    the video system you currently have installed.

2.  Click the "OK" button (or press "Enter").



              Professional Capture Systems Technical Support

Technical support for Professional Capture Systems can be obtained from:

USA
---------
JASC, Inc.
10901 Red Circle Drive
Suite 340
Minnetonka, MN 55343 USA

[phone] (9am to 5pm USA central time)


England
------------------------
The Thompson Partnership
Church Croft,
Bramshall,
UTTOXETER,
Staffs.
ST14 5DE

0889 564601


                       Purchasing the Licensed Version

You may use the shareware version of Professional Capture Systems for a 30 day
trial period. If you would like to continue to use Professional Capture Systems
after the 30 day trial period, you are required to purchase the licensed version
of Professional Capture Systems.

When you purchase the licensed version of Professional Capture Systems you will
receive a disk with the licensed version and the printed user's guide.

Professional Capture Systems may be purchased from a number of sources. You are
free to purchase your copy from where ever you desire. You may also want to
check with your local software store to see if they carry Professional Capture
Systems.

The vendors include:

The Thompson Partnership     - England
JASC, Inc.                   - USA


                                   6


                          JASC, Inc. (USA)

You can order from JASC, Inc. by payment with check or credit card.
The credit cards accepted are MC and Visa.

The numbers for ordering are: Voice [phone] or FAX [phone]

  Professional Capture Systems 1.02 (or latest version)

NAME______________________________________________

COMPANY___________________________________________

STREET____________________________________________

STREET____________________________________________

CITY______________________________________________

STATE_________________________     ZIP____________

COUNTRY_________________

TELEPHONE NUMBER_____________________

Disk Size Prefered  3.5"_____   5.25"_____

Where did you hear about Professional Capture Systems?

________________________________________

Professional Capture Systems....................$39.00...______

Minnesota residents add 6.5% sales tax...................______

Shipping/Handling - US or Canada.................$4.00...______

Shipping/Handling - Outside of US or Canada.....$15.00...______
                                                       ==========

            Total in US Funds drawn on a US Bank.........______

Make checks payable to: JASC, Inc.

Mail to:
  JASC, Inc.
  10901 Red Circle Drive
  Suite 340
  Minnetonka, MN 55343
  USA




                The Thompson Partnership (England)

You can order from The Thompson Partnership by payment with cheque or
credit card. The credit cards accepted are: MC, Visa and American Express.

The numbers for ordering are: 0889 564601 (Voice) or 0889 563219 (FAX)

Please use this form when ordering by mail.

  Professional Capture Systems 1.02 (or latest version)

NAME______________________________________________

COMPANY___________________________________________

ADDRESS___________________________________________

ADDRESS___________________________________________

TOWN______________________________________________

CITY______________________________________________

COUNTRY_____________________ POST CODE____________

TELEPHONE NUMBER__________________________

CREDIT CARD TYPE__________________________

CREDIT CARD NUMBER________________________

EXPIRATION DATE___________________________

Disk Size Prefered  3.5"_____   5.25"_____

Where did you hear about Professional Capture Systems?

________________________________________


Professional Capture Systems...........£26.00 (UK Pounds)
*VAT (at current UK rate)..... ........£_____
Insured Shipping.......................£ 3.00
                                      =======
                          Total       _______

* VAT is Value Added Tax. If you are a resident of a European Community
Country, then you are required to pay the current UK rate. If you are
unsure of the current rate, you can contact The Thompson Partnership.

Make cheques or EuroCheque payable to: The Thompson Partnership
(remember to put your card number on the reverse of the cheque)

Mail to:
 The Thompson Partnership
 Church Croft,
 Bramshall,
 UTTOXETER,
 Staffs, England
 ST14 5DE